Basic Division:
2-1 No part of the amplifier(s),
subwoofer(s), battery or sub woofer enclosure may protrude higher than
the highest point of the seat.
2-2 No part may protrude wider than the
widest part of the vehicle, nor may any part be lower than the lowest
part of the chassis of the vehicle.
2-3 No external modifications are allowed
to the vehicle that will increase the area for equipment to be located.
This limitation does not pertain to vocal speakers, signal processors or
source unit(s). The intentions are that the vehicle does not appear to
have a sub enclosure "thrown" on it, but rather integrated into it
keeping within the original overall dimensions.
2-4 The 'cabin' of the vehicle must remain
stock in appearance and material. Cutting is allowed, adding
'consoles' etc to enhance the score is not.
2-5 The sub woofer system may be ported
into the cabin, howe3ever such 'porting' must be done at or behind the
vertical portion at the bottom of the front seat. No modifications to
accommodate or 'vent' through sub amplifer(s), sub woofer(s) or sub
woofer enclosure(s) may be made in front of this line.
2-6 Modifications are allowed to the seat
back and bottom providing they appear stock, maintain their function of
supporting a child's weight, do not interfere with a child sitting in
the vehicle as it was originally intended, do not protrude past the
original form of the seat and are made of plastic similar to the OEM
material.
Wild Division:
3-1 No part of the subwoofer system,
including the sub woofer, sub enclosure, port, etc. may be closer than
12 inches to the microphone. With the exception of this and the
General Rules, anything goes in WILD!